All of the dead blow mallet hammers manufactured by Smith and Nephew have been recalled after reports of broken mallet heads were made.<\/p>\n
The dead blow mallets<\/em> are different to conventional hammers as they are made to apply more precise pressure and less damage to the surface struck. The minimal elastic rebound is usually created by leaving the hammer head hollow or filled with loose sand, steel beads, or lead beads. However, this means that, if they break or crack, the filling could spill out, and this has resulted in the recall. Needless to say, exposure to lead is a health hazard.<\/p>\n Overexposure to lead can cause attacks to the brain and central nervous system. This in turn can result in convulsions, comas, and even death.<\/p>\n Young children with severe lead poisoning have been known to have mental retardation and behavioural disorders; if they survive the poisoning. However, this is seemingly limited to hip replacement surgeries, so it appears unlikely that any children have been affected. Since the incidents happened during surgery, medical operatives were able to remove the lead beads, and no further adverse effects have so far been reported. Nevertheless, the exposure to the patient and the staff is not to be ignored.<\/p>\n Smith and Nephew have rightly issued a Field Safety Notice and a list of actions for institutes currently possessing the reportedly dangerous hammers. The Gov.uk website has issued the medical device alert and list of steps for institutes and staff to action:<\/p>\n
\n
\nSmith and Nephew have been providing health institutes with dead blow mallets since 1995. Medical professionals use these hammers mainly for hip replacement surgery during broaching and when inserting the hip implants. In the reported cases, the hammer’s welding cracked, and the lead beads fell into the open surgical wounds.<\/p>\nThe dangers of lead<\/h2>\n
Recalls issued<\/h3>\n